Betonit Products
Gypsum Compound
Base preparing material for plasterboard jointing and repair
The jointing compound for plasterboard — fills the joints, takes the tape, sands back easily, and does not go powdery on you.
Use it for
- Filling joints between concrete, fibre cement board, and gypsum board
- Jointing and repairing plasterboard
- Interior use only
- Skimming to a smooth finish before paint
Why this one
- Easy to sand
And not powdery after sanding, so less mess and less rework - Does not shrink, crack, or sag
Joints stay flat as they dry - Short drying time, long pot life
Dries in about an hour but stays workable for 90 minutes - Good adhesion
Bonds to gypsum board, fibre cement board, and concrete - Good workability
Spreads and feathers cleanly with a trowel or putty knife - Free of cracks on the wedge test
Tested and confirmed
At a glance
TypeGypsum-based jointing compound
ColourWhite
Build0–3 mm
Pack size20 kg bag
Coverage61 linear m at three coats
Pot life1.5 hours
