Betonit Products Solutions

Waterproofing Solutions

Safeguard your concrete structures with Betonit's waterproofing solutions, providing long-lasting protection against moisture and environmental factors.

Application Across Variants

All three SealCrete variants seal concrete against water, but each suits a different situation. The matrix below shows where Grey, Premium, and Crystalline are recommended, suitable, or capable — across water-retaining structures such as tanks and reservoirs, and damp areas such as basements, planters, and bathrooms.

GREY
PREMIUM
CRYSTALLINE
GREY
PREMIUM
CRYSTALLINE
n/a
suitable
capable

Concrete Waterproofing Products

  • SealCrete Grey

    Two-component waterproofing system for concrete surfaces


    Brush-applied waterproofing that flexes with the structure — it bridges hairline cracks up to 0.75 mm and holds back water at 1.5 bar with no leakage.

    Use it for

    • Bathrooms, kitchens, and balconies
    • Roof decks
    • Swimming pools and water tanks
    • Fire walls
    • Above or below grade · interior or exterior · vertical or horizontal
  • SealCrete Premium

    Flexible waterproofing membrane for white walls


    The off-white SealCrete — the same two-component system as Gray, but with a fine finish good enough to leave as the final surface in place of white wall paint.

    Use it for

    • Firewalls and retaining walls
    • Bathrooms, kitchens, and plaza decks
    • Waterproofing before laying glass mosaic tiles
    • Where the membrane will be seen and no topping is wanted
  • SealCrete Crystalline

    Moisture-activated waterproofing for concrete


    Waterproofing that works from inside the concrete — water-activated crystals grow into the pores and voids, permanently blocking the paths water would take.

    Use it for

    • Water-retaining structures: tanks, pools, ponds, reservoirs, cisterns
    • Tunnels, bridges, dams, and sewage structures
    • Non-retaining areas: basements, firewalls, roof decks, parking
    • Where the waterproofing must survive later construction work
  • SealCrete RapidPatch

    Fast-setting hydraulic cement for concrete cracks


    The one you reach for when water is already coming through — it sets in three to five minutes and will patch a 20 mm hole under active pressure.

    Use it for

    • Patching active leaks in concrete, up to 20 mm holes
    • Sealing floor and wall joints
    • Sealing settlement cracks in masonry walls
    • Stopping seepage before applying a waterproofing system