Betonit Products
Tiling Solutions
-
Tile Adhesive
Polymer-modified adhesive for ceramic tiles
The everyday thin-bed adhesive — polymer-modified Portland cement and graded fine sand, for ceramic, marble, and granite on floors or walls, inside or out.
Use it for
- Ceramic, marble, and granite tiles by the thin-set method
- Concrete, well-bonded existing tile, granolithic, cement render, or plywood
- Residential through to heavy commercial work
- Interior and exterior installation
-
Premier Tile Adhesive
Polymer-fortified heavy-duty adhesive for tiles and stones
The heavy-duty adhesive — it reaches ANSI 118.4 on water alone, and handles every tile absorption rate including porcelain and dimension stone.
Use it for
- Ceramic, porcelain, marble, granite, and dimension stone
- Large-format and low-absorption tiles that standard adhesive struggles with
- Concrete, well-bonded tile, fibre cement board, or exterior grade plywood
- Horizontal and vertical, interior and exterior
-
White Tile Adhesive
White mortar for light-coloured granite, marble, and glass mosaic
A white Portland cement mortar for pale stone — grey adhesive shadows through light granite and marble, this one does not.
Use it for
- Light-coloured granite, marble, and natural stone
- Glass and translucent mosaic tiles
- Thin to medium bed, up to 19 mm
- Floors and walls, interior and exterior
-
Tile Grout
High-quality grout for filling and finishing tile joints
A polymer-modified joint filler in 23 colours — unsanded for fine joints, sanded for wider ones, both exceeding the ANSI 118.6 requirements.
Use it for
- Filling joints between ceramic, mosaic, porcelain, marble, and granite
- Fine joints from 1.5 mm through to wider sanded joints
- Floors and walls
- Interior and exterior
-
Grout Sealer
Water-based sealer for cementitious tile grout
A penetrating sealer that lines the pores of the grout rather than coating over it — so the grout keeps its natural look but stops soaking up everything that lands on it.
Use it for
- Sealing cementitious tile grout after installation
- Plaster, cement mortar, concrete, and other porous masonry
- Floors where cleaning time is a problem
- Areas prone to mildew
-
PlusCrete
Acrylic emulsion modifier for tile adhesives and grout
Use it in place of water and the adhesive steps up a grade — a synthetic acrylic polymer that lifts bond strength where the job is harder than usual.
Use it for
- Tile-on-tile and tile-on-board renovations
- Tiling in water-submerged areas such as pools and tanks
- Glass mosaics, heavy brick, granite, marble, and natural stone
- As a grout additive for constantly wet areas
-
Bison Tile Adhesive
Ready-to-use adhesive for floor and wall tiles
A straightforward dry-set thin-bed adhesive for standard tiling work — Portland cement, additives, and graded fine sand, mixed with water and laid.
Use it for
- Thin-bed installation of floor and wall tiles
- Standard ceramic tile work
- Concrete and well-prepared substrates
- Interior and exterior
-
Mosaic Mix
Adhesive and grout combo for mosaic tiles
One bag that sets the mosaic and grouts it — a single-step install for glass and translucent tile, where a separate grey adhesive would show through.
Use it for
- Glass and translucent mosaic tiles
- One-step install: bond and grout in the same product
- Feature walls and mosaic detailing
- Interior and exterior mosaic work
Surface Preparation
-
Ezyplast
Acrylic admixture and bonding agent for plaster mix and repairs
An acrylic solution that does two jobs — brush it on as a bonding slurry so new plaster grips old concrete, or mix it into the plaster itself to stop it shrinking and cracking.
Use it for
- Bonding new concrete and plaster to old
- Eliminating the need to scarify or hack the surface
- As a plaster coat admixture for stronger, less brittle render
- Interior and exterior work
-
Skim Coat
Polymer-modified cement for smooth surface preparation
The finishing plaster that takes a rough wall to a paintable surface — smooth-spreading, sands easily, and ready for paint 24 hours later.
Use it for
- Levelling irregularities on interior and exterior walls
- Filling pinholes and hairline cracks before painting
- Patching and repairing concrete walls and ceilings
- As a replacement for crack-prone pure cement plastering
-
FiberCon
Polypropylene fibre for concrete crack prevention
Monofilament polypropylene fibre dispersed through the mix — it holds concrete together through its weakest 24 to 72 hours, when plastic shrinkage cracks form.
Use it for
- Controlling plastic shrinkage in fresh concrete
- Preventing micro-cracks as concrete cures
- Binding cement and sand to stop the mix segregating
- Adding to the final layer of mortar in plastering
-
Gypsum Compound
Base preparing material for plasterboard jointing and repair
The jointing compound for plasterboard — fills the joints, takes the tape, sands back easily, and does not go powdery on you.
Use it for
- Filling joints between concrete, fibre cement board, and gypsum board
- Jointing and repairing plasterboard
- Interior use only
- Skimming to a smooth finish before paint
-
Rhino Skim Coat
Fine white finish for thin plastering and surface preparation
Rhino is the value skim coat — the same job as the Betonit range, under its own brand, for projects where cost per square metre is the deciding factor.
Use it for
- Levelling interior and exterior walls before painting
- Filling pinholes and hairline cracks
- Thin plastering to a smooth white finish
- Volume work where budget is the constraint
-
Hydraux Premium F125
Water-reducing superplasticizer for high-flow concrete
A high-range water reducer that makes concrete flow into the form instead of having to be worked in — fewer honeycombs, fewer hollow spaces, and strength gains rather than losses.
Use it for
- Beams, columns, and precast concrete with congested reinforcement
- Any pour where honeycombing is a risk
- Reducing water content without losing workability
- Concrete that must flow into complex formwork
-
Render Mix
Ready-to-use thick plastering for interior and exterior walls
A thick plaster you mix with water and apply straight onto concrete — it corrects level irregularities and fills bubbles, pinholes, and defects up to 15 mm deep.
Use it for
- Correcting level irregularities in concrete walls
- Filling bubbles, pinholes, and surface defects up to 15 mm
- Rough plastering ahead of skim coat and paint
- Interior and exterior surfaces
-
Protech
Damp-proof plastering mortar with a smooth white finish
A dry-mixed plastering mortar that resists rain and water penetration far better than ordinary plaster, and sands to a superfine white finish ready for paint in 24 hours.
Use it for
- Exterior walls exposed to heavy rain
- Interior walls where a bright white base is wanted
- Levelling imperfections up to 2 mm
- Direct application over any plastered surface, no primer needed
-
Index Gray
Damp-proof plastering mortar with a smooth, gray industrial finish
The same damp-proof plastering mortar as Protech White, finished in gray — for the smooth industrial look, inside or out, without a coat of paint over it.
Use it for
- Exterior walls where an exposed gray finish is wanted
- Interior industrial and loft-style finishes
- Levelling imperfections up to 2 mm
- Walls exposed to heavy rain
Surface Protection
-
MatteSeal
Water-based sealer for stone and stucco
A silane-siloxane sealer that soaks into the pores rather than sitting on top — water beads off, but the stone still breathes and still looks like stone.
Use it for
- Brick, concrete, natural stone, and pavers
- Stucco finishes and plaster mortar
- Flagstones and other porous masonry
- Interior and exterior surfaces exposed to weather
-
LS SealHard
Water-based sealer for concrete densification and protection
A reactive sealer that hardens the concrete itself — it reacts with free lime to densify the slab from within, and the floor keeps improving with age.
Use it for
- Industrial plant and warehouse floors
- Residential and commercial concrete floors
- Countertops and polished concrete
- Interior and exterior concrete surfaces
-
Altamira Ryolitte
Cementitious decorative paint for walls, floors, and ceilings
The flattering finish — smooth, semi-flexible, and breathable, and it works across wall, floor, and ceiling without a visible transition.
Use it for
- Minimalist and modern interiors
- Seamless transitions across wall, floor, and ceiling
- Concrete, fibre cement board, polystyrene, gypsum board, and plywood
- Interior and exterior, as a high-performance alternative to paint
-
Altamira Scorria
Cementitious decorative paint for textured finishes on walls and ceilings
The textured touch — a mineral wall finish in fine or coarse grain that gives real depth and tactile character, not a printed effect.
Use it for
- Accent walls, facade detailing, and rustic interiors
- High-impact interior walls and exteriors
- Concrete, fibre cement board, polystyrene, gypsum board, and plywood
- Where a durable textured finish is wanted instead of paint
-
Altamira Toscanna
Decorative wall plaster for polished interior finishes
The smooth finish — a decorative plaster that takes a natural polish and can be worked into marbled, antique, or distressed effects for premium interiors.
Use it for
- Feature walls in high-end residences and lobbies
- Faux marble, antique, and distressed effects
- Interior masonry, fibre cement board, and gypsum board
- Where an artisanal hand-finished surface is wanted
-
Altamira Cemora
The timeless finish — two-component microcement for walls and floors
A next-generation microcement that gives you the look of polished concrete as a seamless, joint-free surface — only 1 to 3 mm thick, so it goes over what is already there.
Use it for
- Seamless walls and floors in one continuous finish
- Kitchens, bathrooms, and humid areas
- Renovating over existing concrete, tiles, or MDF
- Japandi, wabi-sabi, and industrial loft interiors
-
Altamira Topcoat
Acrylic and emulsion sealer for painted and resilient surfaces
The protective layer over an Altamira finish — gloss for exteriors that take salt spray and UV, semi-gloss for a quieter sheen indoors.
Use it for
- Sealing Altamira Ryolitte, Scorria, and Toscanna finishes
- Surfaces exposed to salt water spray, UV, and dirt
- Floors and walls that need stain protection
- Where a specific level of sheen is wanted
-
Altamira Perla Coat
Metallic highlight coat for Altamira mineral finishes
The metallic layer that finishes an Altamira wall — sponged or rolled over Scorria, Ryolitte, or Toscanna to catch the texture and give the surface depth under light.
Use it for
- Highlighting texture on Scorria, Ryolitte, and Toscanna finishes
- Feature and accent walls
- Gilded, patina, and weathered-metal effects
- Interior decorative work
-
StainBlock
Water-based protective coating against staining and discolouration
A water-based protective coating that keeps stains and discolouration off the surface, and is fully dry within 24 hours.
Use it for
- Protecting walls and floors from staining
- Surfaces prone to discolouration
- Interior and exterior surfaces
- Ahead of or alongside other Betonit coatings
Flooring Solutions
-
Self-Leveling Overlayment
Fast-setting, free-flowing cement blend for interior floors
The same free-flowing technology as the Underlayment, but formulated to be the floor you actually see — poured over an existing surface and finished with a sealer or topcoat.
Use it for
- Resurfacing and covering existing floors
- Decorative seamless floors in six colours
- Interior floors that will take a topcoat or sealer
- Renovation where lifting the old floor is not an option
-
Self-Leveling Underlayment
Fast-setting underlayment for rapid interior substrate levelling
Mix, pour, spread, let dry — a free-flowing underlayment that takes an uneven interior floor to flat in one pouring, up to 10 mm, and you can walk on it after two hours.
Use it for
- Levelling interior floors before vinyl, parquet, carpet, linoleum, or tile
- Renovation as well as new construction
- Residential and commercial floors
- Preparing a subfloor for most floor coverings
-
Floor Smoothing Compound
Cement-based compound for levelling defective concrete floors
Fills the major and minor dips in an old or defective concrete floor — up to 12 mm deep — and gives you a sound, durable base that will not fail under heavy traffic.
Use it for
- Repairing and renovating existing interior concrete floors
- Filling dips and depressions up to 12 mm deep
- Preparing floors that will take heavy traffic
- Eliminating bond failures before a new floor finish
-
Floor Screed
Cement blend for a levelled, semi-smooth floor base
A screed for the deeper work — 20 to 40 mm in one application — with assisted flow so it spreads and levels with far less effort than a site-batched mix.
Use it for
- Building up floor levels from 20 to 40 mm
- Creating a level base before floor finishes
- Screeding large areas where site batching is slow
- Interior floors
Concrete Waterproofing Solutions
-
SealCrete Grey
Two-component waterproofing system for concrete surfaces
Brush-applied waterproofing that flexes with the structure — it bridges hairline cracks up to 0.75 mm and holds back water at 1.5 bar with no leakage.
Use it for
- Bathrooms, kitchens, and balconies
- Roof decks
- Swimming pools and water tanks
- Fire walls
- Above or below grade · interior or exterior · vertical or horizontal
SealCrete Premium
Flexible waterproofing membrane for white walls
The off-white SealCrete — the same two-component system as Gray, but with a fine finish good enough to leave as the final surface in place of white wall paint.
Use it for
- Firewalls and retaining walls
- Bathrooms, kitchens, and plaza decks
- Waterproofing before laying glass mosaic tiles
- Where the membrane will be seen and no topping is wanted
SealCrete Crystalline
Moisture-activated waterproofing for concrete
Waterproofing that works from inside the concrete — water-activated crystals grow into the pores and voids, permanently blocking the paths water would take.
Use it for
- Water-retaining structures: tanks, pools, ponds, reservoirs, cisterns
- Tunnels, bridges, dams, and sewage structures
- Non-retaining areas: basements, firewalls, roof decks, parking
- Where the waterproofing must survive later construction work
SealCrete RapidPatch
Fast-setting hydraulic cement for concrete cracks
The one you reach for when water is already coming through — it sets in three to five minutes and will patch a 20 mm hole under active pressure.
Use it for
- Patching active leaks in concrete, up to 20 mm holes
- Sealing floor and wall joints
- Sealing settlement cracks in masonry walls
- Stopping seepage before applying a waterproofing system
