Products Archive | Page 2 of 3 | Betonit Products Philippines

Rhino Skim Coat
Fine white finish for thin plastering and surface preparation
Rhino is the value skim coat — the same job as the Betonit range, under its own brand, for projects where cost per square metre is the deciding factor.
Use it for

Levelling interior and exterior walls before painting

Filling pinholes and hairline cracks

Thin plastering to a smooth white finish

Volume work where budget is the constraint
Hydraux Premium F125
Water-reducing superplasticizer for high-flow concrete
A high-range water reducer that makes concrete flow into the form instead of having to be worked in — fewer honeycombs, fewer hollow spaces, and strength gains rather than losses.
Use it for

Beams, columns, and precast concrete with congested reinforcement

Any pour where honeycombing is a risk

Reducing water content without losing workability

Concrete that must flow into complex formwork
MatteSeal
Water-based sealer for stone and stucco
A silane-siloxane sealer that soaks into the pores rather than sitting on top — water beads off, but the stone still breathes and still looks like stone.
Use it for

Brick, concrete, natural stone, and pavers

Stucco finishes and plaster mortar

Flagstones and other porous masonry

Interior and exterior surfaces exposed to weather
LS SealHard
Water-based sealer for concrete densification and protection
A reactive sealer that hardens the concrete itself — it reacts with free lime to densify the slab from within, and the floor keeps improving with age.
Use it for

Industrial plant and warehouse floors

Residential and commercial concrete floors

Countertops and polished concrete

Interior and exterior concrete surfaces
Altamira Ryolitte
Cementitious decorative paint for walls, floors, and ceilings
The flattering finish — smooth, semi-flexible, and breathable, and it works across wall, floor, and ceiling without a visible transition.
Use it for

Minimalist and modern interiors

Seamless transitions across wall, floor, and ceiling

Concrete, fibre cement board, polystyrene, gypsum board, and plywood

Interior and exterior, as a high-performance alternative to paint
Altamira Scorria
Cementitious decorative paint for textured finishes on walls and ceilings
The textured touch — a mineral wall finish in fine or coarse grain that gives real depth and tactile character, not a printed effect.
Use it for

Accent walls, facade detailing, and rustic interiors

High-impact interior walls and exteriors

Concrete, fibre cement board, polystyrene, gypsum board, and plywood

Where a durable textured finish is wanted instead of paint
Altamira Toscanna
Decorative wall plaster for polished interior finishes
The smooth finish — a decorative plaster that takes a natural polish and can be worked into marbled, antique, or distressed effects for premium interiors.
Use it for

Feature walls in high-end residences and lobbies

Faux marble, antique, and distressed effects

Interior masonry, fibre cement board, and gypsum board

Where an artisanal hand-finished surface is wanted
SealCrete Grey
Two-component waterproofing system for concrete surfaces
Brush-applied waterproofing that flexes with the structure — it bridges hairline cracks up to 0.75 mm and holds back water at 1.5 bar with no leakage.
Use it for

Bathrooms, kitchens, and balconies

Roof decks

Swimming pools and water tanks

Fire walls

Above or below grade · interior or exterior · vertical or horizontal
SealCrete Premium
Flexible waterproofing membrane for white walls
The off-white SealCrete — the same two-component system as Gray, but with a fine finish good enough to leave as the final surface in place of white wall paint.
Use it for

Firewalls and retaining walls

Bathrooms, kitchens, and plaza decks

Waterproofing before laying glass mosaic tiles

Where the membrane will be seen and no topping is wanted
SealCrete Crystalline
Moisture-activated waterproofing for concrete
Waterproofing that works from inside the concrete — water-activated crystals grow into the pores and voids, permanently blocking the paths water would take.
Use it for

Water-retaining structures: tanks, pools, ponds, reservoirs, cisterns

Tunnels, bridges, dams, and sewage structures

Non-retaining areas: basements, firewalls, roof decks, parking

Where the waterproofing must survive later construction work
SealCrete RapidPatch
Fast-setting hydraulic cement for concrete cracks
The one you reach for when water is already coming through — it sets in three to five minutes and will patch a 20 mm hole under active pressure.
Use it for

Patching active leaks in concrete, up to 20 mm holes

Sealing floor and wall joints

Sealing settlement cracks in masonry walls

Stopping seepage before applying a waterproofing system
Self-Leveling Overlayment
Fast-setting, free-flowing cement blend for interior floors
The same free-flowing technology as the Underlayment, but formulated to be the floor you actually see — poured over an existing surface and finished with a sealer or topcoat.
Use it for

Resurfacing and covering existing floors

Decorative seamless floors in six colours

Interior floors that will take a topcoat or sealer

Renovation where lifting the old floor is not an option